White Polishing Compound Dialux Silver Polish Jewelry White Gold Platinum Silver

Description

WHITE
POLISHING COMPOUND –
FRENCH DIALUX
BLANC
SILVER
POLISHING – FOR
WHITE
METALS
.
“PÂTE DE BROSSAGE – PRODUIT DE POLISSAGE POUR
MÉTAUX”
POLISHING COMPOUND – PRODUCT FOR POLISHING METAL
Dialux
®
Blanc White Polishing compounds a premium compound for white metals.
Dialux White is formulated especially for Silversmiths and Goldsmiths to polish
SILVER
. The Dialux White is widely used by
Metalsmiths for a High Polish Finish. Use a small amount of this compound on a Muslin – Finex – White Buff, make sure buff edge is clean for best results.
“A-1 TOP QUALITY PRODUCT”
TOP SELLER
#1 SELLING
WHITE
ROUGE  ON
e
b
a
y
Compound is for use to bring out Bright Polish on White Metals – Gold – Silver
NOTE:
We have included polishing recommendations at the bottom of this page, to assist you.
Bar size:
4″ x 1″ x 1-1/8″
– 100mm x 25mm x 30mm
Bar Weight:
120 Grams – 4 Oz.
Bars are individually wrapped like Chocolates
(I
n this case like White
Chocolates
).
·
Utilizes Graded Abrasives,
·
Blended with Additives
·
Long Lasting Composition with Minimum Usage
·
Good Adhesion to Buffing Wheels
·
Produces –  High Shine
SALE IS FOR 1 BAR
JETS Product # 1614-930
Made by Lippert/Unipol
SHIPPING: Via First-Class Mail® Package
NOTE: Visit
JETSTOOLS
e
bay Store Listings, where you can see the full variety of
D
i
a
l
u
x
®
Polishing Compounds, Buffing Wheels and more
J
ewelers
E
quipment
T
ools
&
S
upplies
.
JETS Inc
4E 2X-8E 3X-13E 4X-1.0 FRE
NV Z CKSP  M
P
POLISHING RECOMMENDATIONS:
Our recommendations and suggestions on Buffing to obtain the best results possible:
·
Use the right compound for the metal that you are trying to polish
·
It may be needed to go through 2 or 3 steps, in polishing to get the optimum result you are looking to achieve.
·
Make sure that the parts that are being polished are smooth and clean, use the appropriate abrasive to remove lines and scratches.
·
Avoid using different compounds with the same buff, if you have to then make sure to clean and remove any hardened compound residue on the surface edge with a buff rake.
·
Segregate your buffs for the various metals, Gold, Silver, Brass … try not to use the same buff for all metals.  If you have to then make sure buffs are cleaned (dressed) with a buff rake.
·
A clean buffing wheel edge is important.
·
Allow the buff and compound to perform the work they were made and formulated for, excessive force or pressure will hurt the process.
·
Whenever you are working with Platinum never use a buff that was used for another type of metal.
WORK SAFE!
Working with rotary motors and wheels can be dangerous if proper safety procedures are not followed.
PROTECTION –
Protect yourself, your fingers and hands, your face and eyes and use respirators
.